1: Materials.
2: We made the body of the rocket with a PVC but that was way too heavy, and decided to go with something lighter.
3: Body of the Rocket was then made with a can of some type.
4: Placed the body of the rocket on the the tool, which is to find out where the fins can be placed etc.
5: Made the fins of the rocket from the cardboard which was very good quality.
6: Glued the fins to the body,
6: Made the nose cones 3 times, built it 3 times and the 3rd time it felt right. First it was made with Coke can, then a coke bottle, the at last made with masking tape and paper.
7: Made the parachute with Grocery bag from superstore, and tied it with a string and had taped the thing.
8: Painted it.
9: Engine compartment was built with Styrofoam.
10: Straw was glued on with 3 types of glue, and then was taped.
11: Placed the finished Rocket on the Launcher.
Procedure:
1: Materials.2: We made the body of the rocket with a PVC but that was way too heavy, and decided to go with something lighter.
3: Body of the Rocket was then made with a can of some type.
4: Placed the body of the rocket on the the tool, which is to find out where the fins can be placed etc.
5: Made the fins of the rocket from the cardboard which was very good quality.
6: Glued the fins to the body,
6: Made the nose cones 3 times, built it 3 times and the 3rd time it felt right. First it was made with Coke can, then a coke bottle, the at last made with masking tape and paper.
7: Made the parachute with Grocery bag from superstore, and tied it with a string and had taped the thing.
8: Painted it.
9: Engine compartment was built with Styrofoam.
10: Straw was glued on with 3 types of glue, and then was taped.
11: Placed the finished Rocket on the Launcher.